Our Products
The Key Plastics product range includes a very wide selection of plumbing fittings and most types of PVC pipe required for plumbing applications. Many of the fittings in our range have been designed and developed by the company to solve particular plumbing problems resulting in savings for plumbers in both time and money.
Using technology that has been proven over many years in Europe and the USA, Key Plastics now offers an innovative range of sandwich construction PVC electrical conduit in diameters from 80mm to 150.
Manufactured to AS/NZS 2053 this conduit is being used increasingly throughout Australia.
|
|
Drains, Waste and Vent Pipes
The latest version of AS/NZS 1260:1999 for PVC Pipes and Fittings for Drain, Waste and Vent applications requires PVC pipes of 100mm and above diameter to be specified in terms of stiffness to satisfy the requirements of different applications.
Stiffness is a measure of a pipe's ability to withstand lateral deflection or "squashing" which is a critical requirement for buried pipelines.
The stiffness rating (SN) of the pipe must be marked on all DWV pipes with diameters of 100mm and above. The old SH mark has been replaced with SN6 which represents a stiffness of 6000 Newtons/metre/metre as specified in the AS/NZS 1260:1999.
Download brochure (~350Kb)
|
Stormwater Pipe
Key Plastics produces a wide range of pipe and fittings from 90mm to 300mm for all stormwater and drainage applications. All pipes and fittings are solvent cement jointed, ensuring almost total integrity against tree root penetration and leakage. Pipe products are available in either Heavy Duty or Extra Heavy Duty wall thickness and all products are manufactured to AS 1254:1991 "Unplasticized PVC (UPVC) pipes and fittings for storm and surface applications.
Download brochure (~280Kb)
|
|
|
Electrical Conduit
Key Plastics produces a wide range of pipes and fittings for the electrical and telecommunications markets.
Electrical and Communications ducts are available in a wide range of diameters and classes, however in addition to the standard sizes for conduit and bends special classes may be manufactured as agreed between Key Plastics and the end user.
All electrical and communications conduit and fittings are manufactured to AS/NZS2053 or end user specifications.
Download brochure (~1.7Mb)
|
Pipe-M Pressure Pipe
Key Plastics (PVC - M) pressure pipes are manufactured by combining a special alloy of CPE (Chlorinated Polyethylene) and PVC. The use of the latest pipe extrusion technology ensures that the pipe has superior toughness, ductility and hydraulic capacity compared to conventional PVC - U pipe systems.
Key Plastics PVC - M pipe is designed specifically for use in water distribution systems including sewerage and effluent conveyance, irrigation, potable water supply and mining and industrial applications.
Key Plastics PVC - M is manufactured to AS/NZS4766 "Modified PVC (PCV - M) pipes for pressure applications.
Download brochure (~280Kb)
|
|
|
|
